FABRIC

AID

Helps prevent the absorption of water and oil-based stains

Provides sufficient protection for a 2 and 3 seater sofa

Helps prevent UV discolouration & dye transfer

Cleaning made easier after application

Invisible & durable protection

Helps repel dirt, stains & spills

XShield Fabric Aid Fabric Protection Kit Box

Love your furniture like never before - Love your fabric like never before - Love your leather like never before - Love your wood like never before - Love your mattress like never before - Love your shoes like never before -

Suitable for:

Beautiful fabrics display a look like no other type of furnishing. To best preserve the look of your fabrics it is important to regularly vacuum and clean the surface. Common problems with fabrics are staining, colour transfer and damage from use which can affect the make-up of the fabric surface.

XSHIELD FABRIC AID UPHOLSTERY CLEANER

UPHOLSTERY CARE GUIDELINES

Fabric Aid Upholstery Cleaner has been specially formulated to help clean, refresh and degrease upholstery fabrics from the harmful effects of daily wear and tear.

IMPORTANT

Before use on upholstery, test a small inconspicuous area (e.g. fabric under cushions or on the base of the couch) as directed below and allow to dry. If the colour or texture has changed, do not use. If used on medium dark or dark fabrics, excessive rubbing may cause fabric to lighten. Test under a cushion or similarly unobtrusive areas to establish colour fastness.

DIRECTIONS FOR USE

  1. If cleaning a wet substance such as mud or food, allow to dry completely and then attempt to remove excess dirt firstly by using the blunt edge of a knife and then by brushing gently off the surface.
  2. In the case of a liquid spill use a paper towel to blot up the excess liquid, absorb from the side allowing the liquid to soak into the paper towel. Do not dab at the liquid from the top.
  3. When attending to dirty or soiled areas, first unlock the trigger then generously spray the cleaning solution / foam directly to the soiled surface and agitate using a clean cotton cloth or foam sponge until clean.
  4. Allow to dry and repeat if required.

PRECAUTIONS

  • Do not swallow.
  • Keep away from children.
  • Avoid contact with eyes.
  • In case of contact flush with water.
  • Wash hands after use.

IMPORTANT NOTICE TO PURCHASER: The manufacturer’s obligation is limited to replacement of such products as may be found to be defective. The user shall determine the suitability of the product for his/her intended use and assume all risk and liability in connection therewith. The manufacturer recommends that the user should first test a small area on the item to be cleaned, to ensure that there is no longer term risk of damage to the item.

XSHIELD FABRIC AID FABRIC PROTECTOR

UPHOLSTERY CARE GUIDELINES

DIRECTIONS FOR USE

Please Note: The contents of this Fabric Aid Fabric Protection product will provide sufficient protection for a 2 and 3 division sofa.

It is recommended that a SANS approved face mask is used during application.

Shake can well before use.

Use in a well-ventilated area and do not inhale vapours.

Do not smoke or eat during application.

Remove children, animals, and foodstuffs from the vicinity when spraying.

Hold the nozzle 20-30cm away from the surface to be sprayed.

Apply 2 coats of Fabric Aid Fabric Protector to the item being protected, ensuring proper coverage of all high use areas such as seats, backrest and arms.

Allow 10-20 minutes between coats and a further 1-2 hours to dry.

The manufacturer recommends that the user should first test a small area on the item to be protected to ensure that there is no longer term risk of damage to the item.

PRECAUTIONS

Ensure the nozzle is turned away from the face while actuating the dispenser

WARNING

Solvent-based flammable liquid and vapour.

Do not puncture.

Keep away from heat, sparks, open flame and static discharges.

Intentional misuse: deliberately concentrating and inhaling the contents may be harmful or fatal.

SUGGESTED FIRST AID

Eye Contact: Flush eyes with large amounts of running water.

Skin contact: Flush skin with large amounts of running water.

Inhalation: Remove person to a well-ventilated area or outdoors.

If the user should start to experience adverse symptoms such as nausea or further irritation, please seek medical attention.

IMPORTANT NOTICE TO PURCHASER: The manufacturer’s obligation is limited to replacement of such products as may be found to be defective. The user shall determine the suitability of the product for his/her intended use and assume all risk and liability in connection therewith. The manufacturer recommends that the user should first test a small area on the item to be protected, to ensure that there is no longer term risk of damage to the item.

Get yours today!